Our products
We offer solenoid valves in different sizes, pressure ranges
and materials.
For applications that we cannot cover with our standard valve series, we will be pleased to realize special solutions with you.
2/2-way solenoid valves
Typ 20
brass, normally closed or open, direct controlled, DN 1,5 – 10,0 mm, G1/8 – G1/2
Typ 21
brass, normally closed or open, direct controlled, DN 1,5 – 4,0 mm, G1/8 – G1/4, pmax up to 100bar
Typ 31A
stainless steel, normally closed, 1.4305 (AISI 303), direct controlled, DN 1,2 – 2,0 mm, M5
Typ 32
stainless steel, normally closed or open, 1.4305 (AISI 303), direct controlled, DN 1,5 – 3,0 mm, G1/8
Typ 34
stainless steel, normally closed or open, 1.4305 (AISI 303), direct controlled, DN 1,5 – 10,0 mm, G1/4 – G3/8
Typ 35
High pressure valve, stainless steel, normally closed or open, 1.4305 (AISI 303), direct controlled, DN 1,5 – 4,0 mm, G1/4, pmax up to 100bar
Typ 37
stainless steel, normally closed, 1.4301 (AISI 304), direct controlled, DN 16 – 25 mm, G1/2 – G1
2/2-way solenoid valves types, force pilot operated
Typ 76
normally closed or open, stainless steel 1.4301, forced-controlled, DN 16 – 50 mm, G1/2 – G2
2/2-way solenoid valves - pilot operated
Typ 60
normally closed, stainless steel 1.4301 (AISI 304), pilot-controlled, DN 10 mm, G3/8”
Typ 62
normally closed oder offen, stainless steel (AISI 304), pilot-controlled, DN 13 – 50 mm, G1/2 – G2
Typ 63
normally closed or open, stainless steel 1.4301 (AISI 304), pilot-controlled, DN 15 – 50 mm, G1/2 – G2, pmax bis zu 100bar
3/2-way solenoid valves
Typ 84
normally closed or open, body brass, direct controlled, DN 1,5 – 4,0 mm, G1/8 – G1/4
Typ 92
normally closed or open, stainless steal, direct controlled, DN 1,2 – 2,5 mm, G1/8
Typ 94
normally closed or open, stainless steal, direct controlled, DN 1,5 – 4,0 mm, G1/4
Accessories
| device standard | EN 175301-803 (DIN 43650) Form A and C, Form D = ähnlich EN 175301-803 Form B |
|---|---|
| type of construction | Connector with screw terminals |
| cable entry | PG 7, PG 9 or PG 11 |
| temperature range | -40 °C to +100 °C, with electronic components max.+80°C |
| material | PA 6 glass fiber-reinforced, contacts silver-plated |
| unit of supply | connector with profile seal in NBR and center screw M3 |
| tightening torque | 0,5 Nm for type A and D, 0,2 Nm for type C |
| maximum cable diameter | PG 7 = 4 – 6mm, PG 9 = 5 – 7mm, PG 11 = 6 – 9mm |
Electrical data
| voltage | DC voltage or AC voltage |
|---|---|
| protection class | IP65 according DIN EN 60529 (DIN 40050) with correctly mounted connector |
| contact load | see specifications of the particular type |
| LED colour | yellow |
| max. wire cross section | 1,5 mm² rigid wire at type A and D, 1 mm² rigid wire at type Form C |
| special version | flat seal in NBR or in silicone, profile seal in silicone |
Specification
| ambient temperature | -5°C to +50°C, higher allowed ambient temperatures on request |
|---|---|
| fluid temperature | see specifications of the particular coil |
| material | winding copper, temperature class H (180°C), magnetic plate steel zinc plated, encapsulation material see specifications of the particular type |
| standard voltage | 24V DC, 24V 50Hz, 230V 50Hz |
| special voltage on request | 6 – 200V DC, 12 – 250V AC, please note – minimum quantities |
| general duty cycle | 100% ED (DB), continuous operation unless stated otherwise |
| acceptable voltage tolerance | +/- 10% according to VDE0175 (DIN EC 60038) |
| special duty cycle | For coils with duty cycle < 100% ED the maximum duty cycle time is 2 minutes for system 5,7 and 9, and 3 minutes for system 13,16 und 19 according to VDE 0580 |
| protection class | IP65 according DIN EN 60529 (DIN 40050) only with correctly mounted connector and profile seal |
| special version | please note – minimum quantities must be ordered for special types |
Do you have questions about our products?
You would like an individual offer?
Then write us an email, we will answer you as soon as possible.
